Concrete Test Hammer (small and Big both available)

Model No. CCTE003

DESCRIPITION:

Hoverlabs provides a standardised concrete test hammer. The standards on which it works depend on the bounce back effect of a mallet on a cylinder which leans against the surface of the solid items. The Greater the resistance of the solid, more prominent is the bounced back effect. By perusing this bounce back effect on a scale and relating it to bends on charts supplied with the instrument, the imperviousness to pressure in MPa or PSI can be found, with 20% of real.

SPECIFICATIONS & FEATURES:

The solid test mallet is an instrument which is anything but difficult to use, for snappy and inexact estimation of the imperviousness to weight of made solid items. Notable Features Consists of a barrel in which is housed a sledge mass connected to an effect spring which slides on an aide bar. A plunger is connected to the aide bar which is squeezed against the surface to be tried. As the cylinder is squeezed against the surface to be tried, on achieving the compressive quality, the sledge mass is discharged and bounce back to a specific degree (as per the quality of the surface) which is demonstrated by a rider on an aligned scale. A lock catch altered on the body of the mallet secures the rider and the rider can be recared to zero position by utilizing the same catch. The comparable compressive quality can be processed from the diagram supplied. Every mallet is adjusted against at standard test pound, and is suitable for example of compressive qualities 100 - 700 kg/cm. The instrument, complete with a crushing stone for cleaning the test surface, is supplied in conveying case.