Educational learning Board For Embedded Communication

Model No. ELT003

DESCRIPITION:

It is a unique board specially designed around 8051F340 from Silicon Labs to accommodate different variety of embedded concepts, interfacing options, communication protocols and programming techniques. This is the first of its kind of board that offers multiple SPI and I2C devices, motor control, fiber optic, wired and wireless communication etc. on a single board. The board can either be programmed using USB or a JTAG debugger. This board can be used by anyone who is interested to get started with the study of embedded engineering.

SPECIFICATIONS & FEATURES:

This unit comes in Size: 8.75 inch X4.5 inch with Input Voltage - 9V DC,C8051F340 smaller scale controller with 48 Mhz. Max working rate accompanies unique components like 4KB on-chip RAM,64KB on-chip Flash memory, On load up JTAG imitating connector ,Universal Serial Bus (USB) Function Controller, Memory and Flashing,1M bytes (64kx16) off-chip SRAM memory,256K EEPROM interface ,On load up USB for Flashing, On load up Data Transfer Interfaces,DB9 connector for UART0 interface,DB9 connector for UART1 interface,USB Connector for UART0 interface, Connector for RS-485 Interface, Infrared Transceiver, Fiber Optic Transmitter and receiver, Wireless WIXEL module highlighting a 2.4 GHz radio and USB interface and programmable utilizing UART1,Connector for I2C, SPI and Capture signals, Universal Serial Bus (USB) Function Controller,On load up I/O Interfaces and other Facilities,Power-On LED indication,LED at GPIO Pin as One heart-beat ,LED at GPIO Pin as client LED ,Two push catches for client interface,Speaker for client interface,Thermocouple interface connector utilizing I2C peripheral,LCD interfacing utilizing I2C fringe, 1MB EEPROM utilizing I2C peripheral,Temperature sensor utilizing I2C peripheral,ADC utilizing I2C interface,RTC utilizing I2C peripheral,I2C based I/O expander,DAC utilizing SPI fringe with inward OP-AMP hardware, 1MB EEPROM utilizing SPI peripheral,DB15 connector for BLDC Motor Interface (24V, 4000RPM, 5.4A engine can be connected),DB15 connector for Micro venturing Stepper Motor Interface ,DB9 connector for ADC,DB9 connector for DAC,5 channel ADC information office accessible with OP-AMP security circuit,One On load up Potentiometer for ADC test,Two Geared DC engine to be interfaced through PWM peripheral,Ball caster office to make this load up work as ROBOT,3 IR sensor to sense ground plane or to fill in as line supporter.