Process Training Unit

Model No. HV-EXP4485

The Process Trainers are hands on training units for process  operators and maintenance technicians. The units are built to duplicate  real world operating equipment and consists of separate functions all  integrated into a compact, effective training unit in order to train  personnel in the process industry in a safe manner.

The units consists  of the following component sections:  

· Pumps  There are two ANSI process pumps mounted in parallel on the trainer. 

· Tanks , Piping  The trainer is equipped with two tanks and associated  interconnecting piping. All tanks and piping are stainless steel to  minimize corrosion.  

· Level Control  The Process Trainer is equipped with a level control loop, which controls the level in the top receiver.  

· Pressure Control  The unit is equipped with a pressure control loop.  

· Flow Control  The trainer has an orifice flow control loop on it. The flow is controlled to the overhead tank.  

· A temperature control system/loop is provided  with the trainer. The system consists of a side stream, which flows  through a fixed wattage heater. For safety reasons, the heating unit is  equipped with a high temperature shutdown and an over pressure relief  valve. 

· PLC  The Programmable Logic Controller (PLC). It is  integrated to all the control loop functions of the trainer. As  received, it is programmed to operate the system, as well as provide  cascading abilities between various loops. If desired, it can also be  equipped and programmed to provide supervisory interlock functions.  

The Process Trainers are capable of a minimum of 38 specific training and  educational functions with an endless number of potential variables for  trouble shooting scenarios on piping, valves, flanges, flow, level,  pressure, electrical,instrument, pneumatics, It is endless what can be  taught on this all around trainer.