Impact Resistance Tester

Model No. HV-TI0076

The Impact Tester is a widely used device for the coating and plastic industries. In both industries impact resistance is measured by a falling weight from a controlled distance. For plastic materials the force is increased until structural failure occurs. In the case of a coated surface, failure will appear as a crack in the paint film. The impact tester creates a deformation in the surface that can also be used to measure a coating’s flexibility. The Impact Resistance tester is useful for mild abused products in offices, households or labs after years of normal use. Hoverlabs  Impact Resistance Tester is used for direct testing on plating and coating to check the crack formation, break resistance/adhesion and flexibility and for indirect testing is useful for checking resistance to impact surface damage and penetration for construction materials viz. plastic, fiberglass, metal sheet, resin and plywood.

Features:

· It is quite easy to operate.

· Powder coat and chrome plating provides an elegant look to the machine.

· The impact tester depicts 2 Lbs (900 grams), Nose Ø 1.27 CM.

· The length of the guide tube is 40.6 CM.

· Measurement of Die Ø 1.43 CM.

· It has a unique locking arrangement,

· The machine has chrome plating duly powder coated for an elegant look.