Semi Batch Reactor
Model No. HV-EXP379
Semi Batch Reactor A isothermal semi-batch reactor is a semi-closed system with one input stream. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of reaction mixture is uniform throughout). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction the reactor is charged with measured quantity of one reactant. From a feed tank another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Rotameter is provided to measure the flow of Chemicals. The compressed air is used for circulation of feed. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70C with the help of Digital Temperature indicator Cum Controller. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. EXPERIMENTATION: To study a second order sponification reaction in a Semi-Batch Reactor. To determine the Reaction Rate Constant. UTILITIES REQUIRED : Compressed Air Supply at 2 Bar, 0.25 CFM. Water supply and drain. Electricity-1.5kw, Single. Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted. TECHNICAL DETAILS : QQ Reactor : Material Stainless Steel, Capacity 3 Ltrs. (approx). QQ Water Bath : Material Stainless Steel, Double wall, insulated with Ceramic Wool. QQ Heater : Nichrome wire Heater QQ Stirrer : Material Stainless Steel Impeller and shaft coupled with FHP motor QQ Feed Tank (1Nos.) : Material Stainless Steel, Capacity - 20 Ltrs. QQ Feed Circulation : By compressed air. QQ Flow Measurement : Rotameter. QQ Piping : Material Stainless Steel and PVC. QQ Pressure Regulator : 0-2 Kg/cm2 QQ Pressure Gauge : Bourdon type 0-2 Kg/cm2 .
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111