Microcontroller Trainer (Training Kit (LCD))
Model No. HV-EXP2286
Is asingle board microcontroller trainer Kit based on 8bit microcontroller, which is widely used to train engineers to develop on software/hardware for any industrial process & control. Kit has power-full monitor EPROM,RAM, I/O Lines, timer/counter, serial, seven segment display, keyboard for man to machine interface. Features 16K Bytes of EPROM with 8K bytes of battery backup RAM 48 I/O lines, three channel timer/counter, PC Serial interface using USART, interrupt controller Seven segment display with 25 keys hex keypad Power-full command like single stepping, break point, full clock execution, examine memory/ register Uploading & downloading to and from PC in windows98/XP/NT In-built power supply Specifications CPU operating @10/12MHz 8K user RAM using 6264 with battery backup using NICD Battery One socket is provided for RAM expansion up to 64K. 16K bytes of powerful monitor EPROM using 27512 48 I/O lines using 2Nos. of brought at 26 Pins FRC Connector to interface with IC-XX Series Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector. 25 Keys Hexadecimal Keyboard and Six Digit Seven segment display using 8279 KBD Controller Two External interrupts INT0 & INT1 are available at 40 pin FRC connector RS-232C interface using brought out at 9Pins D-Type Connector Auxiliary RS-232C using RX/TX of brought out at 9Pins D-Type Connector Two modes of operation: -Keyboard Mode -Serial Mode Powerful Commands like Examine/ Edit Memory, Examine/Edit Register, Single stepping, Execution, Break Point can be used through hex keyboard or PC serial mode Facility for Downloading/Uploading files from/to PC All Address, Data, Control & Port lines are available on 40 Pins & 20 Pins FRC Connector All IC’s are mounted on IC Sockets Bare board Tested Glass Epoxy SMOBC PCB is used In-Built Power Supply of +5V/1.5A, ±12V/250mA Attractive Wooden enclosures of Light weight Australian Pine Wood User's Manual with sample programs 270mm x185mm x105mm (L xWxH) Weight 3Kgs Optional PRINTER INTERFACE to interface with DOT MATRIX Printer.
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111