Microprocessor Trainer
Model No. HV-EXP2284
Is asingle board microprocessor trainer kit based on 16 bit microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This Kit consists of power-full monitor EPROM, RAM, I/O lines, timer/counter, serial, seven segment display and keyboard for man to machine interface. Features 6K Bytes of EPROM with 16K bytes of Battery Backup RAM 72 I/O Lines, Three Channel Timer/Counter, PC Serial Interface using USART, Interrupt Controller Seven Segment Display with 28 Keys Hex Keypad Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register Uploading & Downloading to and from PC in Windows98/XP/NT In-Built Power Supply Specifications CPU operating at 2.5/5MHz Processor can be replaced by Processor On-board sockets provided to facilitate the use of Coprocessorand I/O Processor 16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB 16K bytes of powerful monitor EPROM using two nos. of 27512 72 I/O lines through 3nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series 16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector RS-232C interface using brought out at 9Pins DType Connector.On-board Interrupt controller using brought out at 20 Pins FRC Connector 28 keys hexadecimal keyboard and eight seven segment display using Two modes of operation: -Keyboard Mode -Serial Mode Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode Facility for Downloading/Uploading files from/to PC All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series All ICS are mounted on IC Sockets. Bare board Tested Glass Epoxy SMOBC PCB is used In-Built Power Supply of +5V/2A, ±12V/250mA Attractive Wooden enclosures of Light weight Australian Pine Wood User's Manual with sample programs 290mm x210mm x105mm (L xWxH) Weight 3Kgs Optional Printer interface to interface with dot matrix Printer On-board EPROM Programmer..
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111