Universal FPGS CPLD Kit
Model No. HV-EXP5815
FEATURES ·; It use industries stand Xilinx 9XC108 with 95XC72 ·; It has a serial & parallel (JTAG) link which enable user to communicate with PC. ·; User can develop the circuit/ schematic using Xilinx standard Foundation Series Software and any development tool for VLSI design available in the world. ·; It has I/O counter interface to enable it to connect various demo modules. This helps in man to machine interface. ·; On-chip Flash Program Memory with In-System Programming (ISP); ·; Can be programmed by the end-user application (IAP) ·; 6-clock/12-clock mode Flash bit erasable and programmable via ISP ·; 6-clock/12-clock mode programmable “on-the-fly” by SFR bit ·; Peripherals (PCA, timers, UART) may use either 6-clock or ·; 12-clock mode while the CPU is in 6-clock mode ·; Speed up to 20 MHz with 6-clock cycles per machine cycle (40 MHz equivalent performance); up to 33 MHz with 12 clocks per machine cycle. ·; Fully static operation ·; Four interrupt priority levels ·; Seven interrupt sources ·; Four 8-bit I/O ports ·; Full-duplex enhanced UART ·; Framing error detection ·; Automatic address recognition ·; Power control modes ·; Clock can be stopped and resumed ·; Idle mode ·; Power down mode ·; Programmable clock-out pin ·; Second DPTR register ·; Asynchronous port reset ·; Low EMI (inhibit ALE) ·; Programmable Counter Array (PCA) ·; PWM ·; Capture/Compare On-board interfaces ·; 16x2 LCD module ·; Six Seven Segment Displays ·; Stepper Motor Controller Interface ·; 8x8 LED Matrix Display ·; EWSN Status LED's 12 Nos. ·; ADC/DAC Interface ·; RS-232 interface ·; Parallel JTAG interface ·; Four Data Switches ·; Switch Array ·; AT24C16 Serial EEPROM ·; 4x4 Keyboard; ·; Power Indicator LED.
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111