Measurement Of Strain Using Strain Gauge
Model No. HV-EXP3204
Measurement Of Strain Using Strain Gauge Parameter Measured : Strain in terms of Kilograms on a cantilever beam.; Measurement System : a] Weights b] Transducer with electronic instrumentation.; Transducer : Temperature compensated strain gauge.; Type : Cu-Ni foil with polyamide carrier base.; Gauge Resistance : 350 Ohms (Nominal).; Gauge Length : 6mm.; Gauge Width : 2.4 mm.; Gauge Base : 12.5 mm x 4.3 mm.; Gauge Factor : 2:1 (approx.); Transducer : Strain gauges mounted on a stainless steel Measurement cantilever beam.; Configuration : Bridge with two arms as strain gauges (Wheatstones Bridge principle).; Range : 10 Kilograms.; Actual Strain : By various weights to be placed in a pan fixed with the beam.; Excitation Source : DC Regulated source.; Tare Adjustment : Zero adjustment by a ten turn potentiometer.; Readout : 3.5 digit digital display to indicate strain in kilograms.; Test Points : Multicoloured test points are provided at various stages in the circuit to observe waveforms and voltages.; Indicator : Mains ON/OFF.; Power Requirements; Standard Accessories : Detailed Instruction Manual..
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111