Vapour- Liquid Equilibrium Set-up
Model No. HV-EXP3594
Vapour- Liquid Equilibrium Set-up The basic data of any distillation problem are the equilibrium between the liquid and vapour phases of the system subjected to distillation. Hence is of great importance to study the vapour-liquid equilibrium. The set-up consists of distillation still with a heating element. An electrical Dimmerstat is connected to heating element for varying heat input. The vapours form the top of column are condensed in the shell and tube type condenser by circulating cooling water. The condensate is collected in reflux drum and feedback to column as reflux. A tank with pump is provided to circulate cold water to condenser. Flow rates can be regulated through control valve fitted. Instrumentation is provided to measure the temperatures at different points. EXPERIMENTATION: ØØ To determine the vapour Liquid Equilibrium curve for CCl4 and Toluene or any other mixture. UTILITIES REQUIRED : ØØ Water Supply. ØØ Drain. ØØ Electricity Supply : 1 Phase, 220 V AC, 1.5 kW. ØØ Refractrometer for Analysis. ØØ Required Chemicals. TECHNICAL DETAILS : qq Distillation still : 1 Ltrs. Capacity, made of Stainless Steel. nsulated by ceramic wool. qq Condenser : Concentric Tube type. qq Heater : Nichrome wire qq Cooling Water Tank : Material Stainless Steel , Capacity 15 Ltrs. Approx. qq Cold Water circulation : Using FHP Pump. qq Temperature Sensors : RTD PT-100 type qq Control panel comprising of Digital Voltmeter : 0-300 Volt. Dimmerstat : 0-230 V, 2A. Digital Temp. indicator : 0-199.90C RTD PT-100 Type with multi-channel switch With standard make on/off switch, Mains Indicator etc. qq Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus qq The whole set-up is mounted on a powder coated base plate .
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111