Computerized Tensile Testing Machine
Model No. HV-TTM0001
It is based on the Constant Rate of
Traverse (CRT) principle. The sample is held between two jaws; the upper one is
a stationary jaw while the other end is made to move at a known fixed speed
with the help of Motor, Gear Box and Lead Screw arrangement. The load exerted
on the Stationary jaw is sensed by a sensor connected with load cell which
directly indicates the load in Digital form in Newton and kg. Genuine software
and RS232 Port connect to the computer.
Technical
Details:
|
Specification |
Model/Capacity |
|
Capacity of Load frame |
30, 50, 100, 250, 500, 1000 (KG) |
|
Load cell capacity |
30KG to 1000KG |
|
Display |
LCD Display For Manual Use / RS232 Port Connect to the
Computer Display |
|
Max. Crosshead Travel (excluding grip) |
950 mm |
|
Max. Working Width |
350 mm |
|
No. of Screws) |
1 no |
|
Load Measurement |
By Load Cell |
|
Speeds :
A) Standard :
Speed Provided B) Optional : AC Variable Speed Drive
|
2 speeds
100 / 300 mm / min
1 to 500 mm / min |
|
Elongation Measurement Standard :
a) Digital Encoder
b) Sensor 1 mm Resolution |
1 mtr. scale Optional
L.C. : 0.01mm
L.C. : 0.1mm |
|
Load Accuracy |
+ 1% |
|
Grip (Tensile Test) |
Screw grip |
|
Overall Dimension
L X D X H (approx. in mm) |
775 X 525 X 1825 |
|
Approx. Weight |
140 Kg |
|
Supply Voltage
a) STD machine
b) AC Variable speed
drive machine |
3 phase : 415V : 0.25HP
Single Phase |
E: info@hoverexport.com w: www.hoverexport.com M: +91 94666 93111