Isothermal Plug Flow Reactor

Model HV-EXP1752
In an ideal Plug Flow Reactor {PFTP} there is no mixing in the  direction of flow and complete mixing perpendicular to direction of  flow.Concentration of reactants varies along the length of reactor but  not in radial direction. In case of a coil turbulence is introduced due  to frequent change in direction of flow and presence of secondary flow,  so a higher value of reaction rate constant is expected in coil tube  type plug flow reactor. This set-up is used to study a non-catalytic  homogeneous reaction under isothermal condition. The set up  consists of two feed tanks through which two reactants are fed to the  reactor. Rotameters are provided to measure the individual flow of  Chemicals. The flow rate can be adjusted by operating the needle valves  provided on respective Rotameter. The magnetic drive pump is used for  circulation of feed. It is a helical coil tube type reactor kept in a  constant temperature water bath to conduct the experiment at various  temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. Experiments Sponification Reaction study in Isothermal Plug flow Reactor To determine Reaction Rate Constant and effect of temperature on it Utilities Required Water Supply & Drain Electricity-I.5kw, Single Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted     Chemical Reaction Engineering lab equipment manufacturers,exporters and Chemical Reaction Engineering Lab suppliers