Isothermal Continuously Stirred Tank Reactor

Model HV-EXP1751
Isothermal Continuously Stirred Tank Reactor  In an ideal CSTR (Le. an ideal steady state flow reactor) the  contents in reactor are well mixed and have uniform composition  throughout.Thus the exit stream has the same composition as the fluid  within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order  liquid phase reaction under isothermal condition. The set up  consists of two feed tanks through which two reactants are fed to the  reactor. Rotameters are provided to measure the individual flow of  Chemicals. The flow rate can be adjusted by operating the needle valves  provided on respective Rotameter. The magnetic drive pump is used for  circulation of feed. The CSTR is fitted with stirrer for proper mixing.  From top outlet of it samples are collected for analysis. Constant  temperature water bath arrangement is provided to conduct the experiment at various temperatures.  Experiments Sponification Reaction study in Isothermal CSTR To determine the Reaction Rate Constant and effect of temperature on it Utilities Required Water Supply & Drain Electricity Supply: I Phase, 220VAC, 1.5kW. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted   Chemical Reaction Engineering lab equipment manufacturers,exporters and Chemical Reaction Engineering Lab suppliers