Fluidized Bed Dryer
Model ELE0008
| The
set-up is designed to demonstrate and stimulate the moisture removal by heat
under forced draft action created by hot air stream and fluidization property
of solid to dry. The set-up consists of a specially designed, vertical Column. The lower conical portion of the column is filled with moist solids. The material is supported on the screen mesh held between two flanges. Air from blower passes through heating chamber to produce hot air works as the drying agent entered from lower side of the column and leave the column from top outlet removes the moisture of solids. At the top outlet of column a cyclone is provided to collect the solid particles taken out by the air stream. An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream Experiments To study the fluidized bed drying Features Superb Painted structure Simple to operate & maintain Compact & stand alone set up Utilities Required Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater MaterialSaw dust @ 1Kg. Granular and free flowing solid of size I - 2 mm Anemometer Air flow measurement |
