Automatic Tissue Processor, Electra Model

Model HV-EXP3028
Automatic Tissue Processor Electra Model (Micro Processor Based) Under the guidance of eminent pathologists our R & D Division has developed yet another unique model of Tissue Processor having complete Programmer logic Controller for complete cycle. Timing & stage sequence, Wax bath temperature safety system etc. are all controlled/operated by feather touch key board with Digital Display. The entire unit looks very attractive with aesthetic appeal. The data is retained in case of power failure. Front panel comprises of the key board, digital display, control switch. The PID temperature controller have been used for controlling the wax bath temperature. Technical Data The 12 stage timing sequence may be programmed for each stage for duration between 1 minute to 9 hrs. 59 minute, in steps of 1 minute. Spare Accessories :– 1 Automatic Wax Bath specially designed for PID control and PT 100 sensor. It signal’s the machine in stage 9, prior to immersion in Wax and if wax is melted it automatically takes change from stage 9 to 10 and so on, but if wax is not melted due to some reasons, then machine signals “Wax not melted or temperature is not proper”. When wax is melted/wax temperature is attained then only the tissue basket is allowed to immerse or rotate in the wax bath. Thus 100% safety of precious tissue. 2 Basket Rotor which rotates the tissue basket slowly. 3 Tissue capsule basket S.S. even perforation. 4 Tissue capsule S.S. 28 × 28 × 9 mm with sliding cover. 5 Tissue capsule S.S. 20 × 20 × 10 mm with sliding cover. 6 Tissue capsule S.S. Circular, 36 mm dia. with auto press lid. 7 Divider for Tissue capsule ‘s’ shape. 8 Divider for Tissue capsule ‘v’ shape. 9 Beaker without lip..